Spare Thruster
Spare Thruster
Product Description
SeaDrone's Inspector 3 Thruster has been designed to provide unmatched thrust performance generating over 2.5 kg of force (5.5 lbs) and measuring under 60 x 96 mm and SeaDrone’s Inspector 3 Thrusters can be replaced in minutes.
IMPORANT NOTES:
- The bearings and anti-vibration mechanism are designed for underwater use. The life cycle of the thruster will be significantly decreased if operating the thruster out of water.
- High power motors can be dangerous. The propellers can act as sharp blades at high speeds. Make sure to firmly clamp down the thrusters and wear safety equipment (goggles, gloves, etc), specially during initial tests.
- Always disconnect all power sources before rewiring a circuit. Otherwise the electronics could be damaged. For example, if you need to swap a motor or a driver, make sure to unpower everything first.
- SeaDrone is not liable for any damage derived from the misuse of the SeaDrone Smart Thrusters electronics, hardware and/or software.